#------------------------------------------------------------------------------ # /etc/config.d/mail - configuration for mail services on EIS/FAIR # Copyright (c) 2002-2015 The Eisfair Team, team(at)eisfair(dot)org # Creation: 2002-04-28 fm #------------------------------------------------------------------------------ START_MAIL='no' # enable mail package: yes or no #------------------------------------------------------------------------------ # pop3/imap: general settings #------------------------------------------------------------------------------ START_POP3='no' # start POP3 server: yes or no START_IMAP='no' # start IMAP server: yes or no POP3IMAP_CREATE_MBX='yes' # create mbx mailbox for imap POP3IMAP_TRANSPORT='default' # transport to use: default, tls or both POP3IMAP_IDENT_CALLBACKS='yes' # enable ident callbacks: yes or no #------------------------------------------------------------------------------ # pop3/imap: mail users and optional passwords #------------------------------------------------------------------------------ MAIL_USER_USE_MAILONLY_PASSWORDS='no' # use seperate mail passwords: yes or no MAIL_USER_N='0' # number of mail-accounts MAIL_USER_1_ACTIVE='no' # 1. activate account: yes or no MAIL_USER_1_USER='frank' # username MAIL_USER_1_PASS='mysecret' # optional mail only password #------------------------------------------------------------------------------ # imap: shared and public folders # # Optional: # Setup public or shared imap folders. This feature is not supported by # some mail clients, but has succesfully tested with netscape messenger. #------------------------------------------------------------------------------ IMAP_SHARED_PUBLIC_USERGROUP='' # name of usergroup for shared and # public folders - default: users IMAP_SHARED_FOLDER_N='0' # number of shared folders to create IMAP_SHARED_FOLDER_1_ACTIVE='no' # 1. activate folder: yes or no IMAP_SHARED_FOLDER_1_NAME='Family-News' # folder to create IMAP_SHARED_FOLDER_1_USERGROUP='' # individual usergroup for folder IMAP_PUBLIC_FOLDER_N='0' # number of public folders to create IMAP_PUBLIC_FOLDER_1_ACTIVE='no' # 1. activate folder: yes or no IMAP_PUBLIC_FOLDER_1_NAME='Announcements' # folder to create IMAP_PUBLIC_FOLDER_1_USERGROUP='' # individual usergroup for folder #------------------------------------------------------------------------------ # fetchmail: general settings #------------------------------------------------------------------------------ START_FETCHMAIL='no' # start FETCHMAIL client: yes or no FETCHMAIL_PROTOCOL='POP3' # protocol to use, normally pop3 FETCHMAIL_LIMIT='4096000' # mail size limit. Default: 4 megabytes FETCHMAIL_WARNINGS='86400' # send warnings once a day (in seconds) FETCHMAIL_DAEMON='1800' # check every 30 minutes (in seconds) FETCHMAIL_TIMEOUT='90' # wait for server reply (in seconds) FETCHMAIL_BOUNCE_MAIL='no' # send error mail to sender: yes or no FETCHMAIL_BOUNCE_SPAM='no' # bounce spam mail to sender: yes or no FETCHMAIL_BOUNCE_SOFT='yes' # soft bounce mail: yes or no #------------------------------------------------------------------------------ # fetchmail: accounts #------------------------------------------------------------------------------ FETCHMAIL_N='0' # number of accounts to fetch FETCHMAIL_1_ACTIVE='no' # 1. activate fetchmail entry: yes or no FETCHMAIL_1_COMMENT='my first server' # optional comment to identify entry FETCHMAIL_1_SERVER='mail.domain.de' # mail server to poll FETCHMAIL_1_USER='username' # username and FETCHMAIL_1_PASS='secret' # password for this server FETCHMAIL_1_FORWARD='user@local.lan' # local account to forward to FETCHMAIL_1_SMTPHOST='' # smtp host to forward to, # default is 'localhost' FETCHMAIL_1_IMAP_FOLDER='' # imap folders to request, default is 'INBOX' FETCHMAIL_1_DOMAIN='no' # if yes fetchmail gets mail for # a whole domain. FETCHMAIL_1_ENVELOPE='no' # if yes, lookup envelope addresses FETCHMAIL_1_ENVELOPE_HEADER='' # look for individual address header FETCHMAIL_1_SERVER_AKA_N='0' # number of dns aliases, default is '0' FETCHMAIL_1_SERVER_AKA_1='' # 1. dns alias FETCHMAIL_1_LOCALDOMAIN_N='0' # number of local domains, default is '0' FETCHMAIL_1_LOCALDOMAIN_1='' # 1. local domain FETCHMAIL_1_LOCALDOMAIN_2='' # 2. local domain FETCHMAIL_1_PROTOCOL='' # set a different protocol # default is FETCHMAIL_PROTOCOL FETCHMAIL_1_PORT='' # set a different ip port, default is 'pop3' FETCHMAIL_1_AUTH_TYPE='' # set a different authentication type # default is 'any' FETCHMAIL_1_ACCEPT_BAD_HEADER='no' # accept bad email headers: yes or no FETCHMAIL_1_DNS_LOOKUP='yes' # if yes dns lookups are performed FETCHMAIL_1_KEEP='no' # if yes mail is left on the server FETCHMAIL_1_FETCHALL='no' # if yes all mail is fetched from the server FETCHMAIL_1_MSG_LIMIT='0' # number of messages per session, default '0' FETCHMAIL_1_SSL_PROTOCOL='none' # ssl protocol: none, ssl3 or tls1 FETCHMAIL_1_SSL_TRANSPORT='no' # enable ssl transport FETCHMAIL_1_SSL_FINGERPRINT='' # ssl fingerprint #------------------------------------------------------------------------------ # smtp: general settings #------------------------------------------------------------------------------ START_SMTP='no' # start SMTP server: yes or no SMTP_QUALIFY_DOMAIN='domain.de' # domain to be added to all unqualified # addresses SMTP_HOSTNAME='eis.domain.de' # canonical hostname of eisfair server SMTP_QUEUE_INTERVAL='30' # queueing interval in minutes, usually 30 SMTP_QUEUE_OUTBOUND_MAIL='no' # set to yes if you are using a dialup ISP # and you want to queue outbound mail until # next queue run which must be initiated # manually or cron-job SMTP_QUEUE_ACCEPT_PER_CONNECTION='10' # msg number to accept in one smtp session SMTP_LISTEN_PORT='' # port(s) on which Exim is listening for # inbound traffic, default is 'smtp' and # 'submission' SMTP_MAIL_TO_UNKNOWN_USERS='bounce' # how to handle mail to unknown mail users: # bounce, copy or forward # default is 'bounce' SMTP_ALLOW_EXIM_FILTERS='no' # allow exim filters in .forward file: yes or no SMTP_CHECK_RECIPIENTS='' # check that not more than the given number of # recipients per mail are addressed at once. # Default is being set to 100 SMTP_CHECK_SPOOL_SPACE='' # check if enough disk space for spool directory # is available. Default is being set to 10Mb SMTP_CHECK_SPOOL_INODES='' # check if enough inodes for spool directory # are available. Default is being set to 100 SMTP_LIMIT='' # mail size limit. Default is being set to 50Mb SMTP_REMOVE_RECEIPT_REQUEST='no' # remove external receipt request: yes or no SMTP_SERVER_TRANSPORT='default' # transport to use: default, tls or both SMTP_IDENT_CALLBACKS='yes' # enable ident callbacks: yes or no SMTP_SERVER_TLS_ADVERTISE_HOSTS='' # advertise STARTLS to these hosts, to disable # this feature set to '' (required for tls!) SMTP_SERVER_TLS_VERIFY_HOSTS='' # verify tls certs of these hosts, to diasble # this feature set to '' SMTP_SERVER_TLS_TRY_VERIFY_HOSTS='' # try to verify tls certs of these hosts, to # disable this feature set to '' SMTP_SERVER_SSMTP='no' # start SSMTP server: yes or no SMTP_SERVER_SSMTP_LISTEN_PORT='' # port on which Exim is listening for # inbound traffic, default is 'ssmtp' #------------------------------------------------------------------------------ # smtp: local domains #------------------------------------------------------------------------------ SMTP_LOCAL_DOMAIN_N='3' # number of local domains SMTP_LOCAL_DOMAIN_1='@' # 1. local domain, @ means SMTP_HOSTNAME SMTP_LOCAL_DOMAIN_2='localhost' # 2. local domain SMTP_LOCAL_DOMAIN_3='domain.de' # 3. local domain #------------------------------------------------------------------------------ # smtp: relay to domains # # Optional: # The folllowing setting specify domains for which your host is an incoming # relay. If you are not doing any relaying, you should leave the list empty. # However, if your host is an MX backup or gateway of some kind for some # domains, you must set SMTP_RELAY_TO_DOMAIN_x to match those domains. #------------------------------------------------------------------------------ SMTP_RELAY_TO_DOMAIN_N='0' # domains for which we are incoming relay SMTP_RELAY_TO_DOMAIN_1='domain.de' #------------------------------------------------------------------------------ # smtp: relay from hosts # # The following settings specify hosts that can use your host as an # outgoing relay to any other host on the Internet. Such a setting # commonly refers to a complete local network as well as the localhost. #------------------------------------------------------------------------------ SMTP_RELAY_FROM_HOST_N='2' # hosts/nets from we accept outgoing mails SMTP_RELAY_FROM_HOST_1='127.0.0.1' SMTP_RELAY_FROM_HOST_2='192.168.6.0/24' #------------------------------------------------------------------------------ # smtp: server authentication # # Optional: # Set the type of server authentication. # none - no authentication # user - each user authenticates himself by his username/password # server - all users authenticate themself by sending a global user/pass #------------------------------------------------------------------------------ SMTP_AUTH_TYPE='user' # authentication: none, user, server, # user_light or server_light SMTP_AUTH_USER='' # if server: global username, else empty SMTP_AUTH_PASS='' # if server: global password, else empty #------------------------------------------------------------------------------ # smtp: smarthosts # # Optional: # Send all outgoing messages to a smarthost (e.g. mail server of your isp). #------------------------------------------------------------------------------ SMTP_SMARTHOST_ONE_FOR_ALL='yes' # use one smarthost for all accounts: # if 'yes', the first entry will be read # if 'no', user specific entries will be used SMTP_SMARTHOST_DOMAINS='' # if SMTP_SMARTHOST_ONE_FOR_ALL='yes' then # use it only for these domains (separated by ':') SMTP_SMARTHOST_ROUTE_TYPE='addr' # if SMTP_SMARTHOST_ONE_FOR_ALL='no' then how to select # smart host: by sender mail 'addr'ess or destination 'domain' SMTP_SMARTHOST_N='0' # number of smarthost entries SMTP_SMARTHOST_1_HOST='' # 1. smart host to send mail to, e.g. mail.gmx.net SMTP_SMARTHOST_1_AUTH_TYPE='none' # 'none', 'plain', 'login', 'md5' or 'msn' SMTP_SMARTHOST_1_ADDR='user@local.lan' # if SMTP_SMARTHOST_ROUTE_TYPE='addr': sender mail address SMTP_SMARTHOST_1_DOMAIN='local.lan' # if SMTP_SMARTHOST_ROUTE_TYPE='domain': destination domain SMTP_SMARTHOST_1_USER='' # if authentication required: username SMTP_SMARTHOST_1_PASS='' # if authentication required: password SMTP_SMARTHOST_1_FORCE_AUTH='no' # set to 'yes' to allow only authenticated connections SMTP_SMARTHOST_1_FORCE_TLS='no' # set to 'yes' to allow only secure connections SMTP_SMARTHOST_1_PORT='' # port to use for outgoing connections, default is 'smtp' #------------------------------------------------------------------------------ # smtp: update ignore hosts file #------------------------------------------------------------------------------ SMTP_UPDATE_IGNORE_HOSTS='no' # update ignore hosts: yes or no SMTP_UPDATE_IGNORE_HOSTS_CRON_SCHEDULE='5 1 * * 0' # cron configuration string #------------------------------------------------------------------------------ # smtp: aliases # # Here you can specify aliases # # General format: # SMTP_ALIASES_x_ALIAS_y='name: user1[,user2,...] # # Example: # SMTP_ALIASES_N='2' # ... # SMTP_ALIASES_2_DOMAIN='2nd.local.lan' # SMTP_ALIASES_2_ALIAS_N='1' # SMTP_ALIASES_2_ALIAS_1='frank: fm,foo@otherwhere.com' # # Mails to frank@domain.de will be delivered to local user fm and to # user foo@otherwhere.com. #------------------------------------------------------------------------------ SMTP_ALIASES_N='1' # number of domains: default: 1 SMTP_ALIASES_1_DOMAIN='' # 1. domain name: will only be read if SMTP_ALIASES_N > 1 # and not SMTP_ALIASES_1_DOMAIN SMTP_ALIASES_1_ALIAS_N='1' # number of aliases SMTP_ALIASES_1_ALIAS_1='root: fm' # 1. alias must be for user 'root'! #------------------------------------------------------------------------------ # smtp: outgoing addresses # # Here you can specify an address translation table which is only available # if SMTP_SMARTHOST_N has been set to a value greater than 0. # # General format: # SMTP_OUTGOING_ADDRESSES_x='name: email address' # # Example: # SMTP_OUTGOING_ADDRESSES_1='fm: frank@domain.de' # # Mail from local user 'fm' will be delivered by using sender address # 'frank@domain.de'. #------------------------------------------------------------------------------ SMTP_OUTGOING_ADDRESSES_N='0' SMTP_OUTGOING_ADDRESSES_1='fm: frank@domain.de' #------------------------------------------------------------------------------ # smtp: incoming addresses # # Example: # SMTP_HEADER_REWRITE_1_SOURCE='*@home.lan' # SMTP_HEADER_REWRITE_1_DESTINATION='$1@domain.de' # SMTP_HEADER_REWRITE_1_FLAGS='sF' # # The envelope from address and the sender of an incoming smtp mail from # user 'frank@home.lan' will be rewritten to 'frank@domain.de' #------------------------------------------------------------------------------ SMTP_HEADER_REWRITE_N='0' # number of rewrite rules SMTP_HEADER_REWRITE_1_SOURCE='*@home.lan' # 1. search mask SMTP_HEADER_REWRITE_1_DESTINATION='valid@domain.de' # replace string SMTP_HEADER_REWRITE_1_FLAGS='sF' # what to rewrite #------------------------------------------------------------------------------ # smtp: mailing lists # # Here you can specify simple mailing lists # # Explanation of example below: # # A mail to 'eisfair@domain.de' will be delivered to all members in the list. # The reply address will be changed to 'eisfair@domain.de'! #------------------------------------------------------------------------------ SMTP_LIST_DOMAIN='home.lan' # domain part of mailing list addrs SMTP_LIST_ERRORS='frank@home.lan' # send errors to this address SMTP_LIST_N='0' # number of mailing lists, change here! SMTP_LIST_1_ACTIVE='no' # 1. activate list: yes or no SMTP_LIST_1_NAME='eisfair' # name of list SMTP_LIST_1_USER_N='2' # number of list members SMTP_LIST_1_USER_1='frank@home.lan' # 1. member SMTP_LIST_1_USER_2='tom@home.lan' # 2. member #------------------------------------------------------------------------------ SMTP_LIST_2_ACTIVE='no' # 2. activate list: yes or no SMTP_LIST_2_NAME='fli4l' # name of list SMTP_LIST_2_USER_N='2' # number of list members SMTP_LIST_2_USER_1='frank@home.lan' # 1. member SMTP_LIST_2_USER_2='joe@home.lan' # 2. member #------------------------------------------------------------------------------ # exiscan: virus scanning # # Here you can specify an additinal antivirus scanner Please make sure # that you have installed a antivirus software prior you enable these feature. #------------------------------------------------------------------------------ START_EXISCAN='no' # start EXISCAN: yes or no EXISCAN_ACTION_ON_FAILURE='defer' # defer, drop or ignore scanner failures EXISCAN_CRYPT_SALT='' # crypt salt - `must' be set to a unique # character string! EXISCAN_DEMIME_ENABLED='yes' # unpack mime containers: yes or no EXISCAN_DEMIME_ACTION='pass' # action on mime exploids: pass, reject, # discard, freeze, redirect
EXISCAN_AV_ENABLED='no' # use viruscanner: yes or no EXISCAN_AV_ACTION='reject' # action on virus: pass, reject, discard, # freeze, redirect
EXISCAN_AV_SUBJECT_TAG='*VIRUS*' # mark subject with tag, only usefull if # EXISCAN_AV_ACTION has been set to 'pass' EXISCAN_AV_SCANNER='auto' # scanner: auto, cmdline, sophie, kavdaemon, # aveserver, clamd, drweb, fsecure, mksd EXISCAN_AV_PATH='' # path to antivirus scanner EXISCAN_AV_OPTIONS='' # cmdline option for scanner incl. '%s' EXISCAN_AV_TRIGGER='' # regexp string if virus has been found EXISCAN_AV_DESCRIPTION="" # grep virus name from regexp description EXISCAN_AV_SOCKET='' # socket for sophie, kavdaemon, clamav ... EXISCAN_AV_SKIP_AUTHENTICATED='no' # skip scan for authenticated users EXISCAN_EXTENSION_ENABLED='no' # use extension checking: yes or no EXISCAN_EXTENSION_ACTION='reject' # action on extension: pass, reject, discard, # freeze, redirect
EXISCAN_EXTENSION_DATA='exe:com:vbs' # filter 'exe', 'com' and 'vbs' extensions EXISCAN_REGEX_ENABLED='no' # use regex checking: yes or no EXISCAN_REGEX_ACTION='reject' # action on regex: pass, reject, discard, # freeze, redirect
EXISCAN_REGEX_DATA='[Mm]ortage : make money' # filter '[Mm]ortage' and 'make money' strings EXISCAN_SPAMD_ENABLED='no' # use spamd checking: yes or no EXISCAN_SPAMD_ACTION='redirect spam@home.lan' # action on spamd: pass, reject, discard, # freeze, redirect
EXISCAN_SPAMD_HEADER_STYLE='flag' # type of X-header: none, single, flag, full, # alwaysfull EXISCAN_SPAMD_SUBJECT_TAG='*SPAM*' # mark subject with tag, only usefull if # EXISCAN_SPAMD_ACTION has been set to 'pass' EXISCAN_SPAMD_THRESHOLD='5.0' # spamd score threshold EXISCAN_SPAMD_ADDRESS='127.0.0.1 783' # address on which spamd is listening EXISCAN_SPAMD_LIMIT='100k' # mail size limit, default: no limit EXISCAN_SPAMD_SKIP_AUTHENTICATED='no' # skip scan for authenticated users #------------------------------------------------------------------------------ # mail: send warning if TLS certificates will become invalid #------------------------------------------------------------------------------ MAIL_CERTS_WARNING='no' # send certs warning: yes or no MAIL_CERTS_WARNING_SUBJECT='TLS certificates warning' # subject of warning mail MAIL_CERTS_WARNING_CRON_SCHEDULE='3 1 1,11,22 * *' # cron configuration string #------------------------------------------------------------------------------ # mail: send exim statistics #------------------------------------------------------------------------------ MAIL_STATISTICS_INFOMAIL='no' # send statistics infomail: yes or no MAIL_STATISTICS_INFOMAIL_SUBJECT='Mail server statistics' # subject of infomail MAIL_STATISTICS_INFOMAIL_CRON_SCHEDULE='55 23 * * 6' # cron configuration string #------------------------------------------------------------------------------ # mail: log handling # # Here you can specify how many logs should be saved and in with interval. # # Example: # MAIL_LOG_COUNT='10' - save the last 10 log files # MAIL_LOG_INTERVAL='daily' - save one log file per day #------------------------------------------------------------------------------ MAIL_LOG_COUNT='10' # number of log files to save MAIL_LOG_INTERVAL='weekly' # interval: daily, weekly, monthly #------------------------------------------------------------------------------ # End #------------------------------------------------------------------------------